16A Home Charging Electric Car Charger LCD Display

£375.00

Product Specification

Model: BS-B10-BC3.5
Mode: C (with type1/type2 plug)
Certificate: TUV, CE
Current: 16A/32A 
Power: 3.6kw/7.2kw
Size: 43*26*26cm/16.9*10.2*10.2in
Weight: 6kg
Rated supply voltage: 220VAC
Rated operating frequency: 50Hz/60Hz
Charging control pattern: Auto/Button/Key/Card
Protection level: IP67

Description

Key features

-High compatibility

It can charge all EVs manufactured in Europe and USA, correctly and effectively.

-Easy to install

Products are sent to you with associated installation tools. You are able to install the charger indoor or outdoor. Firmly locking the charger on the installation backplane can prevent theft.

-Small size

This product is small and exquisite, and thus it is very easy to transport, store and install.

-Containing the intelligent chip

It can automatically repair minor charging problems while charging. When a fault occurs, the lights will blink in different ways to indicate different problems.

-LED Display

shows charging status via screen

16A Home Charging Electric Car Charger LCD Display

How to use

Four options

A. Automatic start charging

1. Turn on the power switch, the display shows the standby state, then starting completed;

2. As shown, plug in the charging plug, the charging station indicator shows green, when the charging lamp flashes, it means that the charging has started;

3.after charging is completed, pull out the cable and insert the cable into the socket or on the cable hook.

16A Home Charging Electric Car Charger LCD Display

B. Button start charging

1. Turn on the power switch, the display shows standby, start complete;

2. As shown, plug in the charging plug, the charging station indicator shows green, press the right button of the charging station, when the button lights up as shown, the charging lamp flashes and flashes, indicating that charging has started;

3. After charging is completed, please press the button, pull out the charging cable, insert the cable into the socket or store it on the cable hook.

16A Home Charging Electric Car Charger LCD Display

C. Key start charging

1. Turn on the power switch, the display shows the standby state, start the completion;

2. As shown, plug in the charging plug, the charging station indicator light is green, and there is a keyhole on the right side of the charging station. Insert the unlocking key and twist it 45 degrees to the right. When the charging lamp flashes, It means that charging has been completed;

3. After charging is completed, please pull out the key and insert the cable into the socket or on the cable hook.

16A Home Charging Electric Car Charger LCD Display

D. Swiping start charging

1. Turn on the power switch, the display shows the standby state, start the completion;

2. As shown, plug in the charging plug, the charging station indicator shows green, use the charging card to start charging, when the charging lamp flashes, it means that charging has started;

3. Please re-swipe the card again and the charging is completed, then put the cable back into the socket or on the cable hook.

16A Home Charging Electric Car Charger LCD Display

E. How to know the charging status

16A Home Charging Electric Car Charger LCD Display

16A Home Charging Electric Car Charger LCD Display

Good to know

-Persons who install and use charging poles must observe the principles and regulations to ensure the personal safety and equipment safety of the personnel concerned.

-Before powering on the device, please confirm that the device is properly grounded to avoid unnecessary accidents

-All tools used do not need exposed metal parts should be insulated to prevent exposed metal parts from touching the metal frame, causing a short circuit.

-Do not modify, retrofit, or change any part by yourself under any circumstances.

-Ensure the service life and operation of the charging pile are stable, and the environment for use of the equipment should be kept as clean, constant temperature and humidity as possible. The charging pile must not be used in the presence of volatile gas or flammable atmosphere.

-Be sure to confirm that the input voltage, frequency, circuit breakers and other conditions of the device have already met the specifications before the device is powered on.

Package including

Charging equipment assembly × 1

Wall mounting plate × 1

Fixed pegboard bolts and screws × 4

Contactless IC card (Optional) × 2

Instruction × 1

Charging station installation board × 1

Backplane locking screw × 2

16A Home Charging Electric Car Charger LCD Display

Parts can be customized

Color, logo, design16A Home Charging Electric Car Charger LCD Display