BS-B10 7.2KW Wall-Mounted EV Charging Station

£375.00

Product Specification

Model: BS-B10
Mode: A (with type2 socket)
Certificate: TUV, CE
Current: 16A/32A single phase/three phase
Power: 3.6kw/7.2kw
Size: 295mm*195mm*70mm
Weight: 5kg
Rated supply voltage: 220VAC
Rated operating frequency: 50Hz/60Hz
Charging control pattern: Auto/Button/Key/Card
Protection level: IP67

Description

Key features

-High compatibility

It can charge all EVs manufactured in Europe and USA, correctly and effectively.

 

-Easy to install

Products are sent to you with associated installation tools. You are able to install the charger indoor or outdoor. Firmly locking the charger on the installation backplane can prevent theft.

 

-Small size

This product is small and exquisite, and thus it is very easy to transport, store and install.

 

-Containing the intelligent chip

It can automatically repair minor charging problems while charging. When a fault occurs, the lights will blink in different ways to indicate different problems.

 

-LED Display

shows charging status via screen

 

BESEN BS-B10 7.2KW Wall-Mounted EV Charging Station

 

 

 

How to use

Four options:

A. Automatic start charging

1. Turn on the power switch, the display shows the standby state, then starting completed;

2. As shown, plug in the charging plug, the charging station indicator shows green, when the charging lamp flashes, it means that the charging has started;

3.after charging is completed, pull out the cable and insert the cable into the socket or on the cable hook.

BESEN BS-B10 7.2KW Wall-Mounted EV Charging Station

 

B. Button start charging

1. Turn on the power switch, the display shows standby, start complete;

2. As shown, plug in the charging plug, the charging station indicator shows green, press the right button of the charging station, when the button lights up as shown, the charging lamp flashes and flashes, indicating that charging has started;

3. After charging is completed, please press the button, pull out the charging cable, insert the cable into the socket or store it on the cable hook.

BESEN BS-B10 7.2KW Wall-Mounted EV Charging Station

 

C. Key start charging

1. Turn on the power switch, the display shows the standby state, start the completion;

2. As shown, plug in the charging plug, the charging station indicator light is green, and there is a keyhole on the right side of the charging station. Insert the unlocking key and twist it 45 degrees to the right. When the charging lamp flashes, It means that charging has been completed;

3. After charging is completed, please pull out the key and insert the cable into the socket or on the cable hook.

BESEN BS-B10 7.2KW Wall-Mounted EV Charging Station

 

D. Swiping start charging

1. Turn on the power switch, the display shows the standby state, start the completion;

2. As shown, plug in the charging plug, the charging station indicator shows green, use the charging card to start charging, when the charging lamp flashes, it means that charging has started.

3. Please re-swipe the card again and the charging is completed, then put the cable back into the socket or on the cable hook.

BESEN BS-B10 7.2KW Wall-Mounted EV Charging Station

 

E. How to know the charging status

BESEN BS-B10 7.2KW Wall-Mounted EV Charging Station

 

BESEN BS-B10 7.2KW Wall-Mounted EV Charging Station

 

 

 

Good to know

-Persons who install and use charging poles must observe the principles and regulations to ensure the personal safety and equipment safety of the personnel concerned.

-Before powering on the device, please confirm that the device is properly grounded to avoid unnecessary accidents

-All tools used do not need exposed metal parts should be insulated to prevent exposed metal parts from touching the metal frame, causing a short circuit.

-Do not modify, retrofit, or change any part by yourself under any circumstances.

-Ensure the service life and operation of the charging pile are stable, and the environment for use of the equipment should be kept as clean, constant temperature and humidity as possible. The charging pile must not be used in the presence of volatile gas or flammable atmosphere.

-Be sure to confirm that the input voltage, frequency, circuit breakers and other conditions of the device have already met the specifications before the device is powered on.

 

 

Package including

Charging equipment assembly × 1

Wall mounting plate × 1

Fixed pegboard bolts and screws × 4

Contactless IC card (Optional) × 2

Instruction × 1

Charging station installation board × 1

Backplane locking screw × 2

 

BESEN BS-B10 7.2KW Wall-Mounted EV Charging Station

 

 

Parts can be customized

Color, logo, design

 

BESEN BS-B10 7.2KW Wall-Mounted EV Charging Station

 

 

Details Images

We have abundant experience of EV charging products. Our products have been successfully applied in most of countries all over the world. From cold Norway to hot Saudi Arabia, you can see form of our products. We provide the most professional products and the best quality service to each of our customers.

We pay more attention to handle the detailed part of our products, hope to provide with our customers’ safety, difficult to damage and convenient operation in use.

Here are some detailed pics about our BS-B10 ev charging station:

 

BESEN BS-B10 7.2KW Wall-Mounted EV Charging Station